Create a brush-on glaze

Always wear gloves, an FFP3 dust mask and, if necessary, safety glasses when mixing powdered glazes.

SOGO glazes can easily be adapted for brush-on application. To do this, use a high-quality brushing medium such as pehatine.

First prepare a diluted Pehatine solution by mixing one part Pehatine with two parts water. In this example, we measure 100 ml of Pehatine and add 200 ml of water. Pour the diluted solution into a well-sealed container and label it clearly. Next, weigh the correct amount of diluted Pehatine solution. The required amount is indicated on the label of each SOGO glaze. Then carefully add the entire contents of the bag of glaze powder. Mix thoroughly using an immersion blender or stir vigorously with a brush for at least one and a half minutes. For a smooth and even result, sieve the glaze through a 60 or 80 mesh glaze sieve. Push the glaze firmly through the sieve using a brush.

The brush-on glaze is now ready to use.